|3/F Talent Building, Shiqiao Subdistrict, Xiacheng District, Hangzhou China||Honesty.firstname.lastname@example.org|
1. Before the construction, the metal surface should be degreased, derusted and treated to improve the adhesion of the paint film. The surface moisture of the metal should be 3 °C above the dew point during construction.
2. Stir the paint evenly before use, and use conventional methods such as brushing and spraying.
3. When spraying, it is necessary to use high-temperature special thinner, the dilution amount is 5-15% (based on the weight of the paint), the nozzle diameter is 1.5-2.0mm, and the air pressure is 0.3-0.4MPa.
4. It is recommended to brush or spray 1-2 steps.
Summary: Through the introduction of the performance characteristics of high temperature paint and high temperature paint construction process, it can be seen that high temperature paint has excellent high temperature resistance, resistance to cold and heat, chemical gas corrosion, weathering resistance, water resistance and electrical insulation.
Long Span Steel Bailey Bridge , 3m Metal Modular Steel Bridge Structure Engineering
Structural Steel Bailey Bridge , Road Highway Construction Army Bailey Bridge Military
Modular Steel Bailey Bridge Panel Shoring Prefabricated Temporary Rental Q345B Steel
Modular Bailey Bridge Panel , Bailey Bridge Components S355JR Or ASTM A572 Equivalent Mechanical Performance
Q345 Bailey Bridge Panel , Bailey Bridge Parts Support On Viaduct Overpass Expressway Construction
Manganese Bailey Bridge Panel High Strength Widely Application In Engineering Projects Rental
Hot Galvanized Steel Truss Bridge Girder Supporting Structure Flyover Footbridge Overcrossing
Sea Span Structural Steel Bridge , Steel Beam Bridge Metal Truss Construction
Truss Girder Structural Steel Bridge , Platform Arch Steel Bridge For People Walking Runway Passing By