Pre-engineered Wire Suspension Bridge For Transportation Customized Overcrossing

Customized Overcrossing Pre-engineered Wire Suspension Bridge Multi-span For Transportation

Description of Steel Suspension Bridge

The suspension bridge is a bridge with a tensile cable or chain as the main load-bearing member, and is composed of a suspension cable, a cable tower, an anchor bolt, a boom, and a bridge deck. The main load-bearing member of the suspension bridge is a suspension cable, which is mainly subjected to tensile force and is generally made of steel (steel wire, steel cable, etc.) with high tensile strength. Because the suspension bridge can make full use of the strength of the material, and has the characteristics of saving materials and light weight, the suspension bridge has the largest spanning ability in various system bridges, and the span can reach more than 1000 meters.

Specification of Steel Suspension Bridge

Suspension Bridges are used for the longest spans across river estuaries where intermediate piers are not feasible, the cables form catenaries supporting both sides of the deck and are tied to the ground usually by gravity foundations sometimes combined with rock anchors.

Application

Our Steel Bailey Bridges have been shipped and erected world-wide and are designed to suit a range of applications and come in a variety of

types dependent upon your specific bridge requirements. Our services include the complete complete bridge design and construction as per

Client's choice of bridge features, and the scope of various bridges are as follows:

· Road Bridges

· Pedestrian Bridges

· Railway Bridges

· Steel Truss Bridge

· Beam Bridges

· Steel Bailey bridge

· Structural Steel Box Bridge

· Highway Bridges

· Composite Beam Bridge

· Cable-Stayed Bridge

· Floating Bridge etc.

Competitive Advantage
Longer main spans are achievable than with any other type of bridge
Less material may be required than other bridge types, even at spans they can achieve, leading to a reduced construction cost
Except for installation of the initial temporary cables, little or no access from below is required during construction, for example allowing a waterway to remain open while the bridge is built above
May be better able to withstand earthquake movements than heavier and more rigid bridges
Bridge decks can have deck sections replaced in order to widen traffic lanes for larger vehicles or add additions width for separated cycling/pedestrian paths.

History
The first wire-cable suspension bridge was the Spider Bridge at Falls of Schuylkill (1816), a modest and temporary footbridge built following the collapse of James Finley's nearby Chain Bridge at Falls of Schuylkill (1808). The footbridge's span was 124 m, although its deck was only 0.45 m wide.

Our company

Our experienced team is focused on your steel bridge project's success, from start to finish. Our proven ability to identify and overcome design inconsistencies, potential problems with erection, and shipping obstacles results in the fabrication of structural steel that is right the first time, helping you avoid costly construction delays.

Proper project coordination and efficient delivery of the structural steel to your bridge project is a key factor in its ultimate success. This is what gives us the leading edge.

From material purchase and tracing, planning compilation, drawing detailing, production arrangement, quality inspection, to on-going painting, packing and delivering, we have separated department to strictly control process, quality and traceability, so that the perfect Bailey/Belay/Baley Bridge can be made.

Finally we would like to emphasize that not like other companies, nearly all machining parts and mechanical accessories are manufactured in our own shop as we have so many wonderful machines and workers inside. In this way, the quality, cost and delivery time can be ensured which eliminates other exterior factors’ influence.

Warmly welcome all friends and clients from International market to visit us!